PadJack Computer Port Seals

Product Overview

Padjack computer locks and seals help to secure your electronic equipment, networks, and data for your installed equipment or while in transit.

USB ports are at risk from a data theft, a computer virus or other malicious software from unauthorized USB flash drives and devices.

Exposed RJ45 ports can be blocked to prevent unauthorized access to networks and servers. Also, deactivated jacks or unused ports throughout a facility can be blocked and tagged to avoid subsequent retesting.

Exposed D-sub connectors for VGA ports and Parallel Ports can be protected from unauthorized displays and communication equipment.

All of the Padjack seals have unique serial numbers for added security and tracking.

Typical applications include unoccupied offices, hallways, lobbies, hospitals (HIPPA certified), data centers, casinos, nuclear facilities, military facilities, etc.

Stock products are listed below. For optional customized product, please call.

RJ45 Enhanced Lock (one-time use), MS-SVE025

RJ45 Enhanced Lock

RJ45 Enhanced Lock

This seal protects exposed RJ45 ports by physically blocking access to a jack on the wall or console.

No special tools are needed to insert the plastic seal and secure it in the jack. To remove the seal, use a standard pair of snips to cut the plastic I-beam on the lock, which will physically destroy the seal (one-time use), but without damaging the RJ45 jack.

The RJ45 lock is sold as a pack of 25 seals. If ordered by 2PM EST, the seals ship the same day.

computer port seal

Add to Cart Code: MS-SVE025

Pricing Information
Qty (Seals) Pack (25) $/Seal $/Pack (25)
25 1 $3.20 $80.00
500 20 Call Call
Specifications
Code MS-SVE025
Material Polycarbonate
Color Translucent Orange
Packaging 25 seals / pack
Imprint (white) "PADJACK" + unique serial number

USB Port Lock -- 2-piece Lock (re-usable) and Wire Loop Seal, MS-USB5

USB Port Lock

USB Port Lock

This lock protects unused USB ports by physically blocking access. The lock is a two-piece unit which fits into the USB port. A wire loop is threaded through aligned holes in the 2-piece lock to secure the lock in place. After threading, the wire loop seal is also locked to secure the USB lock into place.

Typical applications are exposed USB ports on servers, routers, laptops, computers and portable devices.

No special tools are needed to insert the plastic seal and secure it in the USB port. To remove the seal, use a standard pair of snips (or scissors) to cut the wire loop, which will physically destroy the wire loop seal.

This USB port lock is sold as a set:

  • (1) 2-piece lock (re-usable) with matching serial numbers
  • (1) wire loop seal (one-time use) with a unique serial number; wire length is 5 inches.

The USB port lock is sold in packs of 5 seals. If ordered by 2PM EST, the seals ship the same day.

A single wire loop seal can be used to secure multiple USB port seals if they are within reach of the wire loop length. Additional wire loop seals can be purchased separately.

usb port lock

Add to Cart Code: MS-USB5

Pricing Information
Qty (Seals) Pack (5) $/Seal Set $/Pack (5)
5 1 $13.00 $65.00
500 100 Call Call
Specifications
Code MS-USB5
Material Polycarbonate
Color Translucent Orange
Packaging 5 sets / pack
Imprint (black) "PADJACK" + unique serial number

USB Port Lock, 2 piece lock (one-time use), MS-USB5-1

USB Port Lock Separate USB Port Lock

USB Port Lock

This lock protects exposed USB ports by physically blocking access. The lock is a two-piece unit which fits into the USB port.

No special tools are needed to insert the 2-piece plastic seal and secure it in the USB port. To remove the seal, break off the extended tab, which will physically destroy the lock, but without damaging the USB port.

Typical applications are exposed USB ports on servers and routers. Using on computers (desktop and laptop) or portable devices is also possible, but this seal may be more susceptible to accidental handling abuse, which could inadvertently break off the extended tab and ruin the seal.

The USB port locks are sold in packs of 5 seals. If ordered by 2PM, the seals ship the same day.

usb port lock

Add to Cart Code: MS-USB5-1

Pricing Information
Qty (Seals) Pack (5) $/Seal $/Pack (5)
5 1 $13.00 $65.00
500 100 Call Call
Specifications
Code MS-USB5-1
Material Polycarbonate
Color Translucent Orange
Packaging 5 seals / pack
Imprint (black) "PADJACK" + unique serial number

USB Cable Lock (re-usable) and Wire Loop Seal, MS-USBCL5

USB Cable Lock & Seal Wire Loop Seal USB Cable Lock & Seal Side

This lock protects any cables connected to a USB port on desktops, laptops, servers, routers and portable devices.

The lock physically secures the USB cable to the port, which prevents the cable from being removed. First, the one-piece lock is inserted and positioned into the USB port. When the USB cable is inserted in the port (over the lock), the lock is physically secured in the USB port. A wire loop seal secures the cable to the lock and port.

No special tools are needed to insert the plastic seal and secure it in the USB port. To remove the seal (and USB cable), use a scissors or snips to cut the wire loop, which will physically destroy the wire loop seal, but without damaging the USB port or cable.

This USB cable lock is sold as a set:

  • (1) lock (re-usable) with a unique serial number
  • (1) wire loop seal (one-time use) with a unique serial number; wire length is 5 inches.

The USB cable locks are sold in packs of 5 sets. If ordered by 2PM EST, the seals ship the same day.

Additional wire loop seals can be purchased separately.

usb cable lock

Add to Cart Code: MS-USBCL5

Pricing Information
Qty (Seals) Pack (5) $/Seal $/Pack (5)
5 1 $13.00 $65.00
500 100 Call Call
Specifications
Code MS-USBCL5
Material Polycarbonate
Color Translucent Orange
Packaging 5 seals / pack
Imprint (black) "PADJACK" + unique serial number

VGA & Parallel Port Locks (reusable) with wire loop seal, MS-DB9 & MS-DB25 (MS-DB25 shown)

Parallel Port Lock

Base and cap

 

Parallel Port Loop

Base, cap, and loop assembled

 

Port lock

Base, cap, and loop applied to port

This 2-piece lock (base and cap) with wire loop seal is designed to protect exposed VGA ports (MS-DB9 for 9 pin) and parallel ports (MS-DB25 for 25 pin).

The base piece is affixed to the port using the supplied metal screws. Then the cap slides into place until the locking holes are aligned. Finally, a wire loop seal is threaded through the aligned locking holes to secure the port lock.

A screwdriver is needed to affix the base to the port. The cap and wire loop seal do not require any tools. To remove the seal, use a scissors or snips to cut the wire loop, which will physically destroy the wire loop seal, but without damaging the port.

The VGA and Parallel Port locks are sold as a set:

  • (1) 2-piece lock (re-usable) with matching unique serial numbers
  • (2) metal screws (re-usable)
  • (1) wire loop seal (one-time use) with a unique serial number; wire length is 5 inches.

The DB9 and DB25 port locks sold in packs of 5 sets and are priced the same. If ordered by 2PM EST, the seals ship the same day.

Additional wire loop seals can be purchased separately.

vga port lock   Add to Cart Code: MS-DB9 (VGA Port Lock, 9 pin)

parallel port lock   Add to Cart Code: MS-DB25 (Parallel Port Lock, 25 pin)

Pricing Information
Qty (Seals) Pack (5) $/Seal $/Pack (5)
5 1 $15.00 $75.00
500 100 Call Call
Specifications
Code MS-DB9 or MS-DB25
Material Polycarbonate
Color Translucent Orange
Packaging 5 sets / pack
Imprint (black) "PADJACK" + unique serial number
Ready to ship Same day, if ordered by 2pm EST

Wire Loop Seals, MS-WLS5

Wire Loop Seal

Additional Wire Loop Seals are available for use with D-Sub Port Locks, USB Port Locks, and USB Cable Locks.

Sold in packs of 5 seals. If ordered by 2PM EST, the seals ship the same day.

wire loop seal

Add to Cart Code: MS-WLS5

Pricing Information
Qty (Seals) Qty Pack (5) $/Seal $/Pack (5)
5 1 $2.80 $14.00
500 100 Call Call
Specifications
Code MS-WLS5
Material Polycarbonate
Color Translucent Orange
Wire Braided stainless steel, 5 inch long
Packaging 5 seals / pack
Imprint (black) "PADJACK" + unique serial number

Cable Seal, 0.7 mm diameter (0.027 inch), Adjustable Length, Red, Bag of 100, MS-WB-V3


Cable Seal

Our twist seal features a 0.7mm diameter wire for sealing latches with small holes. The seals include a serial number (in black) with a matching bar code.

Sold in bundles of 100 seals. Ships next day.

View Video

100 seals/pack:
Add to Cart Code: MS-WB-V3

Qty (Seals) Qty (Pack) $/Seal $/Pack Total
100 1 $0.84 $84.00 $84.00
500 5 $0.71 $71.00 $355.00
1000 10 $0.58 $58.00 $580.00
5000 50 Call Call Call
Specifications
Specifications
Wire Type Braided, Stainless Steel
Wire (Diameter x Length) 0.7mm x 12 in
Overall Seal Dimensions 1 in x 1.125 in x 1.125 in
Locking Body Plastic, White/Red
Stock Imprint
  • Unique Serial Number
  • Bar Code
Stock Imprint Color Black
Packaging Bags of 100 seals
Weight (Bag of 100) 0.7 lbs
Typical Shipping Carton 6 in x 6 in x 6 in

Cable Seal, 0.8 mm diameter (0.031 inch), Adjustable Length, Red, Bag of 100, MS-WA-R3


Cable Seal

Our plunger seal features a 0.8mm diameter wire for sealing latches with small holes. The seals include a serial number (in white).

Sold in bundles of 100 seals.

View Video Add to Cart Code: MS-WA-R3

Qty (Seals) Qty (Bags) $/Seal $/Bags Total
100 1 $0.715 $71.50 $71.50
500 5 $0.606 $60.60 $303.00
1000 10 $0.497 $49.70 $497.00
5000 50 Call Call Call
Specifications
Specifications
Wire Type Braided, Galvanized
Wire (Diameter x Length) 0.8mm x 8 in
Overall Seal Dimensions 1.5 in x 0.5 in x 0.375 in
Locking Body Plastic, Red
Stock Imprint Unique Serial Number
Stock Imprint Color White
Packaging Packs of 100 seals
Weight (bundle of 100) 0.05 lbs
Typical Shipping Carton 6 in x 6 in x 6 in
Can't Find What You're Looking For? Try our Application Search
For Questions and Ordering Information, Please Contact:
Mike Klein Mike Klein
Sales & Customer Service
(800) 336-6636 ext 4223
email: mklein@novavisioninc.com
Questions? Need Help?